Achilles Repro community connects buyers and suppliers in Southern europe & LATAM Utilities sector. Repro is a community that allows buyers to minimise risk and streamline procurement, while suppliers have a unique opportunity to connect with key industry players
The cave plant in Stazzona, in the municipality of Villa Tirano, is located at 394 meters, at the lower altimeter point of the entire hydropower system of Valtellina.
HISTORY Work on the construction of the plant, begun in 1935, ended in 1938 with the operation of the plant. The plant has been revamped in the mid-1980s.
OPERATION The plant uses the waters derived from the Sernio basin, made through the barrier of the Adda river by the same cross. Through a derating channel the waters are brought to the loading tank and then fed to the turbines in the engine room through a forced conduit. The waters released by the Stazzona plant are no longer used for A2A hydroelectric production in the province of Sondrio. At the Sernio basin, the central homonym uses the waters released in Adda for Minima Vitale, that is the amount of water released to ensure the conservation of the river ecosystem.
The objective of the Water Security Mega Reservoirs Project is to provide the 7 days of potable water storage in the new mega reservoirs and the existing and future secondary reservoirs preserving the water quality as per Kahramaa and World Health Organization (WHO) standards.
Will be a new social and civic hub in the heart of Doha
The agreement is a first of its kind in UAE, and aims to make Dubai ready for the anticipated increase in the quantity of hazardous liquid waste, as existing industries expand and new ones are set up. Those hazardous liquid waste required special material and deep knowledge. All valve solution provided by valveIT.
Saudi Arabia is the richest of the Arabian Gulf States with the largest healthcare market in the Gulf region. The Saudi government recently launched an ambitious five-year development plan, worth €14 billion, to develop 121 new hospitals and upgrade 66 hospitals. The Saudi Health Minister further announced the development of 33 new hospitals within two years. As a result Saudi Arabia is looking for the latest technologies and innovations in hospital design, fit-out and medical systems and services in order to realise these projects.
valveIT award this ambitious project about valves for WTP
Saipem S.p.A. is an Italian oil and gas industry contractor. It was a subsidiary of Italian energy company Eni, which owned approximately 30% of Saipem’s shares until 2016.
valveIT srl technology is now approved under following classes:
LIST OF COMMODITY CODES ALREADY QUALIFIED VALVEIT SRL
SAP Code CLASS
M02635015 ORIFICE PLATES AND FLANGES, VENTURI TUBES AND NOZZLES, FLOW STRAIGHTENING VANES, METER RUNS
M02635016 INTERCHANGEABLE ORIFICE PLATES DEVICE
M02635017 STANDARD AND MULTIPLE PITOT TUBES
M02635018 WEDGE FLOW METER
Born in 2002 out of the aggregation of 11 municipal companies operating in Emilia-Romagna, first corporation of its kind nationwide, over time Hera has embarked on a journey of consistent and balanced growth, incorporating other companies active in the same areas. Hera, publicly listed since 2003, turned 15 on 1st November 2017 and is now among the nation’s largest multi-utilities, working mainly in the environment (waste management), water (aqueduct, sewerage and purification) and energy (electricity, gas distribution and sales, energy services) sectors. Other services offered include public lighting and telecommunications. Its range of activities undergoes continuous and constant development, and reflects the five levers on which the Group’s strategic orientation is founded: growth, efficiency, excellence, innovation and agility.
Within the panorama of public services in Italy, the Hera Group’s leadership can easily be recognised in a few figures: almost 9,000 employees who meet the needs of 4.4 million citizens in over 350 municipalities in Emilia-Romagna, Friuli-Venezia Giulia, Marche, Tuscany and Veneto.
Class of approval are:
FRVA0106 – B VALVOLE A SARACINESCA IN GHISA* FRVA0108 – B VALVOLE DI RITEGNO* FRVA0159 – B VALVOLE IN GHISA A SARACINESCA CUNEO GOMMATO* FRVA0160 – B VALVOLA A FARFALLA IN ACCIAIO FLANGIATE PER ACQUA* FRVA0161 – B VALVOLE A FARFALLA IN ACCIAIO FLANGIATE PER GAS* FRVA0162 – B VALVOLE A FARFALLA ‘WAFER’ IN GHISA PER GAS* FRVA0164 – B VALVOLE A SFERA FILETTATE CON LEVA IN OTTONE PER ACQUA.
EMAAR Group is a leading global property developer and provider of premium lifestyles. UAE leader.
valveIT has been selected as HVAC, plumbing and DCP valve manufacturer.
It runs for about 40 kilometres from Al Wakra in the south to Lusail in the north. The line also connects Hamad International Airport at Terminal 1 to the centre of the city. It has 18 stations with the Legtaifiya Station allowing passengers to transfer over to the Lusail.
valveIT HVAC WRAS approved valves already delivered to this strategic project.
Welded valve configurations for SAP (sterile access port) and GMP (good manufacturing practice) are designed for the control of ultrapure and sterile fluids. The configurations are made from two separate forged or casting valve bodies and fall into industry standard patterns. They are welded to be fully drainable and can be operated by either a pneumatic actuator or a manual handwheel. The user can choose the required configuration in two separated specification keys. The first details the geometry, body and diaphragm materials while the second specifies body sizes, end connections, operator and surface finishes
The valve is full port, single chamber basic valves that incorporate a one-piece disc and diaphragm assembly. This assembly is the only moving part within the valve allowing it to open, close, or modulate as commanded by the pilot control system.
The Stainless Steel design offers superior corrosion resistance, as well as a lightweight alternative to conventional heavy iron valves. Stainless Steel construction provides extended diaphragm life, and reduces the frequency and labor
As a PRO AT FLUID CONTROL, valveIT is more and more called for integrate his the full range of valve and accessories in a process loop.
CEMS are useful tools in gathering process emissions data for environmental compliance demonstration and process control and optimization.
valveIT is the leader in GAS ANALYSIS having delivered more than 10 projects in mining DRI plants.
ASME BPE pipes, orbital welding, aseptic diaphragm valves were delivered to buid up the rack of distribution in a fermenter plant.
valveIT has just completed the delivery of complete CIP (Clean In Place) system for a new fermenter plant in north of Italy.
The pilot plant skid is a unit for testing performances of RO membranes widely used in RO plants. It runs at high pressure of 70 bar and is made by duplex steel to achieve best performances on high TDS water.
Skids has been designed and is under construction as a prototype.
Flow meters have several uses in different industrial applications. When a high measuring accuracy is required, using a Meter Run is the best technique of every primary element. It is an arrangement that consists of an orifice plate with calibrated downstream and upstream pipes and flanges.
valveIT has awarded the production for ANSALDO (the italian giant of turbine manufacturer) of METER RUN.
Sharjah Municipality is responsible for planning and providing the requirements of transport, roads & traffic in the Emirate of Sharjah. valveIT has been approved by Sharjah Municipality to partecipate to this important and strategic job for UAE.
In order to assure the best support during the selection and operating of valveIT products we have empowered our staff in UAE with Prabin.
Welcome aboard buddy!
valveIT will attend WATREX exhibition 2017
valveIT FCU-Link System is a set of valves, connectors and unions designed specifically for the application of chilled water or heating water fan coil units.
Also known as fusion-bond epoxy powder coating and commonly referred to as FBE coating, is an epoxy-based powder coating that is widely used to protect steel.
All of our product can be manufactured with FBE coating.
All models of valveIT valves for fire protection come in a UL/ULC listed and FM approved version.
The purpose of WRAS is to contribute to the protection of public health by preventing contamination of public water supplies and encouraging the efficient use of water by promoting and facilitating compliance with the Water Supply (Water Fittings) Regulations and Byelaws in Scotland.
valveIT valve product range is WRAS approved.
We are completing the manufacture of stainless steel pipes to a seawater desalination plant with 300,000-ton capacity which Orascom will build in El Galalah and Port Said in Egypt.
It is the largest desalination plant in the country which can provide fresh water to about 2 million people a day.
valveIT has signed an important agreement with TNG a powerful trading company baser on Doha – Qatar. TNG is the unique responsible company to promote and handle valveIT brand in Qatar. We’d like to wish to TNG staff the best for a mutual plenty future.
valveIT has implemented a comprehensive HSEQ management certified system by Kiwa under ISO9001, ISO 14001 and OHSAS 18001
ALBILAD is one of the largest Iraqi companies in Iraq for Designing, Planning, Implementing all Contructions, MEP and infrastructure works as General Contractor and EPC.
They have visited than approved valveIT technology for their project.
Thanks for the kind visit and the time spent together.
Demetrio Marchianò with the most experience of primary flow element joined valveIT as a Business Developer Manager Oil&Gas.
Had an amazing CV with experiences performed in FMC, Euromisure (WIKA group).
His knolwedge is about calculation and heading the manufacturing of Venturi, Orifice fittings, Multistep restriction orifices, Flow nozzle ptc6, Fiscal metering tube including calibrationing in authorized laboratory.
I’d like to personally welcome you to the team. It’s an exciting time for valveIT srl as we continue to grow,we strive to remain as adaptable, motivated and responsive to our new employees as we are to our customers.
Ettore has the most experience about aseptic valves and bio processes and joined valveIT srl as a PM for Bio&Pharma valves.
We’re glad to have you on board!
valveIT srl has opened the new office in Cairo to handle power stations and water projects in Egypt and Africa.
Ibrahim Selim that will run the new office, joined valveIT group as a Operation Manager of Water Treatment having the most experiences in these fields.
We’re glad to have you on board!
Members of the Egyptian – East Delta Electricity Production Company – were trained by our staff about valveIT process solutions installed on Giza North Combined Cycle Power Plant (CCPP).
valveIT met Gol e Gohar Iron & Steel and Pamidco staff for the kickoff meeting for Kowsar DRI project.
Kish to host Iranian iron and steel conference.
Kish Island, February 2016- The Iranian Iron and Steel Conference will kick off in Kish island which will bring together over 400 domestic and foreign experts and specialists. valveIT is present with his local and international staff.
Thanks all of you for participating at Christmas dinner this year.
You really made a fantastic evening. Highlights included magnificent meal, river of genuine italian prosecco (not for all..eheh), fun company… wow!
We ate too much of course but we all had a great time.
valveIT arranged a seminar in Colombo – Sri Lanka for the launch of the new PICV (pressure indipendent control valves and all HVAC basket product valves.
60 local engineers from the most important EPC on HVAC in Sri Lanka attended this meeting.
Thanks to all!
It is a great honour to have you in our team.
Nader Majdi nassab is one of the most expert in the world of DRI process, the ecological process for pelletizing iron powder.
He’ll bring to valveIT his international experience, knowledge and quality of his job.
Project type: EPC, in a consortium with NICC
Description of the project: One DRI & material handling plant with nominal capacity of 800,000 ton/year for Chaharmahal VA Bakhtiari Steel Complex in state of Chaharmahal Bakhtiari
Chahar Mahal & Bakhtiari “Direct Reduction Plan” , as one of the 8 projects that has the most physical progress in companies to other relative projects.
Future world will need a new fuel for the cars which is not pollutant and Methanol is the best choice. Methanol demands increased up for nearly 20% of the overall demand in the Middle-East and African regions.
One of the biggest italian EPC that have awarded this key project, entrusted valveIT to produce and test the complete range of valves for the project Waste Heat Boiler for Methanol Plant destinated to the giant KAVEH METHANOL.
Valves with pressure rating 1500 PSI with size up to 24 inch will be produced in the record time of 8/12 wks by valveIT.
We are very pleased and proud to inform you that our company’s implementation of: ISO 9001:2008 – QUALITY MANAGEMENT SYSTEM(QMS)
Following the award of the big project EL HARRACH / Algeria for buiding a pumping station, valveIT has started the production of the pipeline that is part of the project. We thanks Mr. Ahmed Ramzy head of the project to visit us and made the inspection of our production site.
We are focused on complete package solutions where always we have to produce and handle heavy valves or accessories mainly delivered to plants enviromental friendly.
Think green is our main target, to deliver a better world to our next generations.
Beside the 5 tons forklift with special water filter to clean 100% all the emissions, purchased in the 2014, we have invested in the new forklift 8 tons 100% driven by electricity.
We are delighted you are joining us as a new Warehouse Manager.
Manuele will be the responsible of logistics, installations, inspections procedures.
valveIT partecipated to Iran Oil Show exhibition 2015 where a record of visitor was achieved.
Let us wish all the exhibition participants fruitful work for the sake of the industry strengthening and efficient development!
We are proud to opening the second warehouse in Italy. Located in Casalecchio di Reno – Bologna will be revamped and used as main building for installation and storage of valveIT valves and plants.
Management of Chaharmahal Bakhtiari Steel Company visit valveIT to check the status of the project awarded and now under construction.
We’d like to thank Mr. Mirzaei and Mr. Dorwash for the kind visit and the time spent together in Bologna.